TUbliss Gen 2.0 Tire System
Cycle News Staff | December 30, 2017
TUbliss Gen 2.0 Tire System
The TUbliss system replaces tire inner tubes with small red 100-psi inserts that create two different pressure zones inside the tires, essentially converting them to tubeless tires. The TUbliss acts as a rim lock, so the bike can still be ridden with a flat, or plugged without having to remove the wheel. The TUbliss stabilizes the tire closer to the rim, so the sidewall stands up better, letting the tire absorb more impacts instead of the rim.
- Increases Rim Protection
- Acts as a 360-degree rim lock, so even if you get a flat you can still ride the bike back and not get left on the trail.
- Decreases weight (approx. 1lb per tire lighter)
- Allows for use of tire plugs for fast flat fixes without needing to remove the wheel
- Turns any dirt bike tire into a “tubeless” tire
TUBliss Tire System In Action:
SIZES: 18”, 19”, 21”
MSRP: $99.95
949.558.5203, www.tubliss.com
For your convenience, we compiled the complete video series on how to install the TUbliss:
Tubliss Installation Step 1 – Introduction
Tubliss Installation Step 2 – Drill Prep & Tape Rim
Tubliss Installation Step 3 – Remove Bladder from Liner & Adjust
Tubliss Installation Step 4 – Tubliss On Rim
Tubliss Installation Step 5 – Put Rim Inside Tire
Tubliss Installation Step 6 – Tire Mount
Tubliss Installation Step 7 – Lubrication & Inflation
Tubliss Installation Step 8 – Tire Removal
Tubliss Installation Step 9 – Tubliss Removal
