Press Release | December 22, 2017
The 2018 MV Agusta F3 RC Will Come With a Race Kit
This is a press release from MV Agusta…
Throughout MV Agusta’s history, racing motorcycles and production models have always been closely entwined. A fact highlighted by extraordinary successes, such as the outstanding results achieved by the Italian manufacturer in recent years in the World Superbike and Supersport championships. Ever since the F3 was first conceived, engineers, designers and the racing department have worked towards increasing the performance; developing the chassis, engine and electronics with the dual goal of winning on track and bringing the unique thrills of a race motorcycle to the road.
With the RC range, MV Agusta once again highlights its aptitude for racing: the F3 675 RC and F3 800 RC have much in common with the motorcycles seen at national and international race events yet are also exhilarating road motorcycles. Further development has made the 2018 models Euro 4 compliant. A variety of updates have been implemented to comply with the new standard, which requires a 50% cut in emissions and 48% less noise compared to Euro 3. On the styling front, new colors and graphics mirror those seen on the actual race motorcycles. With their new RC red wheels – a direct Supersport offshoot – the 2018 F3 RC motorcycles are unmistakable.
ENGINE
Despite the switch to Euro 4, the most striking parameter remains maximum power. The F3 675 RC touches 128 hp (94kW) at 14,500 rpm with 71 Nm (55.5 lb-ft) of torque at 10,900 rpm; the F3 800 reaches 148 hp (108kW) at 13,000 rpm with 88 Nm (64.9 lb-ft) of torque at 10,600 rpm. Some of the most significant technical redesigns on the 2018 models concern the balance shaft, the primary gearing, the intake cam profiles and the valves.
The gearbox has undergone a complete overhaul to make shifting easier and reduce clutch lever effort. Exhaust manifolds have also been redesigned, while the F3 RC silencer – supplied by the SC Project in the Race Kit – derives directly from the unit used by the Racing Department that significantly increases the power. (See KIT.)
As on the F3 675 and F3 800, the RC models introduce new engine covers. These enhance engine protection in the event of a collision or fall and reduce mechanical noise emissions. All without compromising that distinctive MV Agusta sound.
ELECTRONICS
The F3 675 RC and 800 RC control platform, developed extensively through racing, is based on the MVICS (Motor & Vehicle Integrated Control System). Key developments on the 2018 models include improved Ride By Wire performance, now with personalised mappings. Parameters on the 8-level traction control have also been fully revised to enhance effectiveness and fluidity. Moreover, the EAS 2.0 electronic shifter (up and down) has been optimised for smoother shifting.
CHASSIS
A new frame mount point for the three-cylinder engine ensures increased overall rigidity, improving the already exceptional dynamic characteristics of the motorcycle. The tubular steel trellis frame, closed off with aluminum alloy plates, is designed to offer maximum handling performance, as is evident from the wheelbase of just 1,380 mm, despite the long 576.5 mm single-sided swingarm.
SPECIAL KIT (for race use)
The limited edition F3 RC motorcycles comes with a top-drawer kit that boosts motorcycle performance even further, effectively making it identical to the race version in terms of equipment and appearance. In just a few simple steps, the kit can be used to transform the F3 RC road motorcycle into a perfect track day machine. The titanium exhaust system (for race use), with carbon fiber silencer, is supplied by SC Project and comes complete with carbon fibre heel guard and aluminum silencer support brackets. Also included in the kit is the electronic control unit (for race use only) with a dedicated mapping to maximise the increase in performance (133 hp at 14,570 rpm on the F3 675 RC and 153 Hp at 13,250 rpm on the F3 800 RC). The rear seat cowl (for single- seat use) adds a touch of eye-catching style, as do the machined from billet brake and clutch levers. The included rear sprocket is for race track gearing, while the rear stand and motorcycle cover are for maintenance purposes. As proof of its uniqueness, each RC comes with its own certificate of origin.
PRICE
The new F3 RC will arrive in U.S. dealerships January 2018, coming standard with a three-year warranty and two years roadside assistance.
F3 675 RC: MSRP $19,998
F3 800 RC: MSRP $21,998
To secure your limited-edition F3 RC, visit your local MV Agusta dealership or register your interest on mvagusta.com.
